Vestax PCV-150 Owner's Manual page 7

16
10
PCV-150 / PROFESSIONAL MIXING CONTROLLER
FOR THE CREATIVE DJ / PRODUCER
ALLOWS YOU TO CREATE YOUR OWN MUSIC WITH
LINE
VESTAX'S UNSURPASSED ENGINEERING AND DESIGN.
5
MASTER LEVEL
L
-20
MAX
R
+6 dB
OUTPUT
+6 dB
SUB MASTER
+6 dB
MIN
CROSS FADER
L
CF ASSIGN
PGM 1
PGM 2
TRANSFORMER
12
!2 I NPUT EQ-LOW(Equalizer Low)
Auxiliary bass knob. Boosts of +6dB and cuts of -
24dB are possible at 80Hz.
!3 C UE SWITCH
Used to send the signal to the monitor section for
head phone.
!4 I NPUT FADER
Used to adjust input level of the various PGM
channels. Usually at 7-8.
!5 P EAK LEVEL METER
The bar graph level meters indicate the peak L&R
output.
!6 S UB MASTER OUTPUT LEVEL
Adjust the signal level output from SUB MATER
OUT jack on the rear panel.
!7 C UE OUTPUT LEVEL
Adjust the signal level output from CUE OUT jack
on the rear panel.
!8 M ASTER BALANCE
Determines balance between left and right channels.
15
1 50
-16 -12 -10 -8 -4 -2 0 +2 +4 +8 +12
dB
BALANCE
L
CUE OUT MASTER
OUT
MAX MIN MAX MIN MAX
CF ASSIGN
PGM 3
PGM 4
23
21
R
MASTER CUE
TRANSFORMER
!9 M ASTER OUTPUT LEVEL
Adjust the signal level output from MASTER OUT
jack on the rear panel.
@0 M ASTER CUE SWITCH
Used to send the signal to the monitor section for
head phone.
@1 C ROSS FADER
Mixes the signals assigned by CROSSFADER
ASSIGN SWITCH (
and right side. When the crossfader is in the center
position, both left and right signals can be heard.
This is a detachable feder for ease of replacement
with CF-PCV when it is worn out.
@2 C ROSSFADER ASSIGN SWITCH
Used to assign the signals from each of the PGM
channels to either side of the crossfader or to the
master section.
@3 T RANSFORMER SWITCH
With the crossfeder moved to either right or left, the
opposite program can be heard instantly by pressing
the opposite transformer button.
6
17
18
19
20
22
@2
) to left side of the crossfader