Mounting Instructions - Victron energy Phoenix VE.Direct 12 | 250 Manual

Mounting instructions

Figure 1
Figure 2
Mount the inverter with four screws vertically up- or downwards or horizontally up- or
downwards (as indicated in Figure 1) against a sturdy wall or horizontally on a
suitable ground surface (as indicated in Figure 2). Keep at least 4 inches (10 cm)
clearance with respect to other apparatus/objects. Beware that IP21 only applies to
the lower mounting method depicted in Figure 2; otherwise IP20 is applies. Do not
mount the inverter upside down to a surface.
11