Preparation Before Using With A Computer; Installing Tools For Ur-C - Steinberg UR24C Startup Manual

Preparation before using with a computer

Preparation before
using with a computer
The following three setup procedures are
required before you can use the device with
a computer.

• Installing TOOLS for UR-C

• Activating Basic FX Suite
• Downloading Cubase AI (DAW)
Installing TOOLS for UR-C
Download TOOLS for UR-C previously from
the Steinberg website. Follow the steps
below to install the TOOLS for UR-C.
NOTE
• You are only permitted to use this software
pursuant to the terms and conditions of the
"License Agreement" shown during the
installation.
• Future upgrades of application and system
software and any changes in specifications
and functions will be announced at the
following website.
https://www.steinberg.net/
• The eLicenser Control Center (eLCC) for
controlling the product license is installed at
the same time.
Windows
1.
Disconnect all USB devices other
than the mouse and keyboard
from the computer.
2.
Start the computer and log on to
the Administrator account.
Exit any open applications and close
all open windows.
3.
Extract the previously downloaded
TOOLS for UR-C.
10
UR24C Startup Guide
4.
Double click the [setup.exe] file in
the extracted folder to start the
installation.
5.
Follow the on-screen instructions
to install the software.
NOTE
• While installing the software, the "eLicenser
Control Center" installation message
appears. Follow the onscreen instructions to
install the software.
• You can select the desired software to be
installed on the installation screen.
- Yamaha Steinberg USB Driver
- Steinberg UR-C Applications
- Basic FX Suite (VST3 Plug-ins)
6.
When installation has been
completed, click [Finish].
If a window requiring you to restart your
computer appears, follow the onscreen
instructions and restart the computer.
Confirmation of Installation
7.
Move the [POWER SOURCE]
switch to the left and then connect
the device to a USB 3.0 jack on the
computer with the included USB
cable.
Make sure not to connect it to a USB
hub.
8.
Open the [Device Manager]
window as follows.
[Control Panel]  ([Hardware and
Sound])  [Device Manager]