Steinberg UR24C Startup Manual page 11

9.
Click on the [>] mark next to
"Sound, video and game
controllers."
10.
Confirm that the device name is
listed.
Installation of the TOOLS for UR-C is now
complete.
Mac
1.
Disconnect all USB devices other
than the mouse and keyboard
from the computer.
2.
Start the computer and log in to
the Administrator account.
Exit any open applications and close
all open windows.
3.
Extract the previously downloaded
TOOLS for UR-C.
4.
Double click the [TOOLS for UR-C
V**.pkg] file in the extracted folder
to start the installation.
The characters ** represent the version
number.
5.
Follow the on-screen instructions
to install the software.
NOTE
• While installing the software, the "eLicenser
Control Center" installation message
appears. Follow the onscreen instructions to
install the software.
• You can select the desired software to be
installed on the installation screen.
- Yamaha Steinberg USB Driver
- Steinberg UR-C Applications
- Basic FX Suite (VST3/AU Plug-ins)
Preparation before using with a computer
6.
When installation has been
completed, click [Restart] or
[Close].
Confirmation of Installation
7.
Move the [POWER SOURCE]
switch to the left and then connect
the device to a USB 3.0 jack on the
computer with the included USB
cable.
Make sure not to connect it to a USB
hub.
8.
Open the "Audio MIDI Setup"
window as follows.
[Applications]  [Utilities]  [Audio
MIDI Setup]
9.
Confirm that the device name is
listed in the left column.
Installation of the TOOLS for UR-C is now
complete.
UR24C Startup Guide
11