Notice - Steinberg UR24C Startup Manual

PRECAUTIONS
• Do not place the product in a location where
it may come into contact with corrosive
gases or salt air. Doing so may result in
malfunction.
• Before moving the product, remove all
connected cables.
Maintenance
• Remove the USB cable from the computer
when cleaning the product.
Handling caution
• Do not rest your weight on the product or
place heavy objects on it.
6
UR24C Startup Guide

Notice

To avoid the possibility of malfunction/
damage to the product, damage to data, or
damage to other property, follow the notices
below.

Handling and maintenance
• Do not use the product in the vicinity of a TV,
radio, or other electric products. Otherwise,
the product, TV, or radio may generate noise.
• Do not expose the product to excessive dust
or vibration, or extreme cold or heat, in order
to prevent the possibility of panel
disfiguration, unstable operation, or damage
to the internal components.
• Do not install in locations where temperature
changes are severe. Otherwise,
condensation may form on the inside or the
surface of the product, causing it to break.
• If there is reason to believe that
condensation might have occurred, leave
the product for several hours without turning
on the power until the condensation has
completely dried out, in order to prevent
possible damage.
• Do not place vinyl, plastic or rubber objects
on the product, since this might cause
alteration or discoloration of the panel.
• When cleaning the product, use a dry and
soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-
impregnated wiping cloths, since this might
cause alteration or discoloration.
PA_en_11 2/2