Usb Console Led; Actv Led - Cisco Catalyst 3650 Series Hardware Installation Manual

Chapter 1 Product Overview
Table 1-4
Port Mode
PoE
1. Only switches with PoE+ or Cisco UPOE ports

USB Console LED

The USB console LED
Table 1-5
Color
Off
Green

ACTV LED

The ACTV LED
Table 1-6
Color
Off
Green
OL-29734-01
Meaning of Switch LED Colors in Different Modes (continued)
Port LED Color
1
Off
Green
Alternating
green and
amber
Blinking amber PoE is off due to a fault or because it has exceeded a limit set in the
Amber
(Figure
USB Console Port LED
Description
USB console is disabled.
USB console is enabled.
(Figure 1-8) shows the status of the switch being active or not.
ACTV LED
Description
Switch is not the active switch.
Switch is the active switch or a standalone switch.
Meaning
PoE is off.
If the powered device is receiving power from an AC power source,
the port LED is off even if the device is connected to the switch port.
PoE is on. The port LED is green when the switch port is providing
power.
PoE is denied because providing power to the powered device will
exceed the switch power capacity.
switch software.
PoE faults occur when noncompliant cabling or powered
Caution
devices are connected to a PoE port. Use only
standards-compliant cabling to connect Cisco
prestandard IP phones and wireless access points or
IEEE 802.3af-compliant devices to PoE ports. You must
remove any cable or device from the network if they
cause a PoE+ fault.
PoE for the port has been disabled.
PoE is enabled by default.
Note
1-8) shows whether there is an active USB connection to the port.
Catalyst 3650 Switch Hardware Installation Guide
Front Panel
1-23