Chapter 2
Switch Installation
Mounting the Switch in a Rack
After the brackets are attached to the switch, use the supplied Phillips machine screws to attach the
brackets to the rack
left or right bracket.
Figure 2-10
1
1
2
After you complete the switch installation, see the
more information about switch configuration.
OL-29734-01
(Figure
2-10). Use the black Phillips machine screw to attach the cable guide to the
Mounting the Switch on a Rack
2
4
Phillips machine screw, black
Cable guide
3
3
Front-mounting position
4
Number 12 or Number 10 Phillips machine
screws
"After Installing the Switch" section on page 2-14
Catalyst 3650 Switch Hardware Installation Guide
Installing the Switch
for
2-13