Storage Conditions - MTX M2M MTX-DIN Series User Manual

3.3 Storage conditions

The conditions stated below are only valid for modems in their original packed state in weather
protected, non-temperature-controlled storage locations. Normal storage time under these
conditions is 12 months maximum. The modems will be delivered in a packaging that meets the
requirements according "IPD/JEDEC J-STD-033B.1" for Low Temperature Carriers.
Type
Air temperature: Low
High
Relative Humidity: Low
High
Condensation
Air pressure: Low
High
Movement of surrounding air
Water: rain, dripping, icing and
frosting
Radiation: Solar
Heat
Chemically active substances
Mechanically active substances
Sinusoidal Vibration:
Displacement
Acceleration
Frequency range
Shocks:
Shock spectrum
Duration
Acceleration
www.mtx-terminals.com
Condition Unit
-30 ºC
+75
10 %
90 at 30ºC
90-100 at 30ºC
70 kPa
106
1.0 m/s
Not allowed -
1120 W/m2
600
Not recommended
Not recommended
1.5 mm
5 m/s2
2-9 9-200 Hz
semi-sinusoidal
1 ms
50 m/s2
www.mtxm2m.com
MTX M2M® by MATRIX ELECTRONICA S.L.U
MTX-DIN Family
Reference
ETS 300 019-2-1: T1.2, IEC 60068-2-1 Ab
ETS 300 019-2-1: T1.2, IEC 60068-2-2 Db
---
ETS 300 019-2-1: T1.2, IEC 60068-2-56 Cb
ETS 300 019-2-1: T1.2, IEC 60068-2-30 Db
IEC TR 60271-3-1:1K4
IEC TR 60271-3-1:1K4
IEC TR 60271-3-1:1K4
-
ETS 300 019-2-1: T1.2, IEC 60068-2-2Bb
ETS 300 019-2-1: T1.2, IEC 60068-2-2Bb
IEC TR 60271-3-1:1C1L
IEC TR 60271-3-1:1S1
IEC TR 60271-3-1:1M2
IEC 60068-2-27 Ea
2015/10 v2.3
/
Page 38 103