GE IM-4 Owner's Manual And Installation Instructions page 43

Icemaker accessory kit
Table of Contents

Advertisement

Available languages

Available languages

5
POWER CORD ADAPTER
There are two power cord adapters included with the
kit; be sure to use the one specified in the Parts List on
page 7. Plug the female end of the power cord adapter
(22) onto the male terminals on the icemaker power
cord. When connecting the adapter to the power cord,
make sure the seal is in place between the connectors.
Secure the power cord adapter to the icemaker by
putting it into the hook at the back of the icemaker
and attaching it to the icemaker with a wire tie (24).
Hook
6
INSTALL THE ICEMAKER FILL
CUP
Install the icemaker fill cup (side-mounted)(18) into
the icemaker as shown.
PLUG IN THE ICEMAKER
7
Holding the icemaker in place, insert the icemaker
power cord plug (D) into the socket on the rear wall,
making sure the prongs and holes are matched. Press
the plug firmly into the socket. Lock the plug in
place by clipping the restraints onto each side of the
plug. Make sure the restraints click into place.
Installation Instructions
22
Seal
Wire tie
Hook
18
D
MOUNT THE ICEMAKER
8
• Lift the icemaker so the fill tube (16) goes into the
fill cup opening (18). Hang the icemaker on the
two screws (14).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends into the fill cup
opening at the back of the icemaker. (Check the
rear of the refrigerator to make sure the fill tube
has not been pushed out of the back of the
refrigerator).
• THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREW.
9
INSTALL THE ICE BUCKET
Place the ice bucket (11) under the icemaker.
Make sure the icemaker power switch is set to OFF.
10
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
11
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
43
16
18
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents