To connect the battery:
1. Using a quarter coin or flat-head screwdriver (not includ-
ed), open and remove the battery access cover (Fig. 7).
2. Loosen the rubber belt and pull out the battery.
3. Remove the cover from the battery's negative (-) terminal
and connect the black cable to the battery's negative (-)
terminal as shown in Fig. 8.
The generator's positive pole has already been connected.
Double check to confirm that the connection is secure.
4. Return the battery into position and use the rubber belt to
fasten the battery.
5. Reinstall and secure the battery access cover.
IMPORTANT:
If you do not plan to use the gen-
erator for a long period of time, we recommend
DISCONNECTING the negative battery cable from
the battery to protect the battery from losing
charge. After disconnecting the cable, cover the
free end with an insulator such as electrical tape.
You may also choose to use a trickle charger (not
included) to maintain battery charge.
GENERATOR PREPARATION
Rubber Belt
Fig. 7
Battery
Access
Cover
Fig. 8
17