Advertisement
Installing the mount
2
i. Determine the centre of the first flat screen at the bottom left.
Mark the centre, for the centre of the rail.
WALL
ii. Mark and drill two fixing holes for each wall plate (part 1)
assembled. Insert all wall plugs (part A3) and the top
wood screws (part A1). Do not fully tighten - Allow a
gap (approx.10mm).
iii. Hook the wall plate (part A1) on using the keyholes.
Once the rail is hooked on, fasten the wood screws
(part A2) into the bottom holes and tighten all fixings.
10mm
ii.
1
5
A1
A2
A1
WALL
LEVEL
9
Advertisement
