Maintenance - Eaton Crouse-Hinds Series Operating Instructions Manual

Explosion protected led-exit luminaire
Hide thumbs Also See for Crouse-Hinds Series:
Table of Contents

Advertisement

Available languages

Available languages

7.

Maintenance

Observe the national regulations
applicable to the maintenance, servicing and
test of apparatus for explosive atmospheres
e.g IEC/EN 60079-17 as well as the general
rules of engineering!
7.1
Battery replacement
See fig. 5
When the battery shows low capacity because
of ageing the battery has to be changed.
Only use certified genuine CEAG/CCH spare
parts! (See CEAG/CCH spare parts list).
Cut the apparatus off the voltage before
opening it!
Before opening the enclosure ensure that
no potentially explosive atmosphere is
present
Open the luminaire.
 Unplug the connection between batterie
printed board.
 Unscrew and remove the screws of the
battery housing.
Assemble the new battery in reverse order.
12
Explosion protected LED­exit luminaire
Series: EXIT N
8.
Servicing
When servicing, in particular those components
that affect the explosion protection, will have to
be checked, e. g.:
­
Housing and protective bowl for any cracks
or damages.
­
Gaskets for their perfect condition.
­
terminals and blanking plugs for their firm fit.
­
Because of the risk of an electrostatic
charge, the light fitting shall only be cleaned
with a damp, non­fibrous cloth or sponge!
Only use customary household washing­up
liquid diluted in water as specified! The
water temperature may be max. 50 °C.
After that, rinse with clear water to prevent
the risk of tension cracks in the protective
bowl!
9.
Repair/Overhaul
Repairs that affect the explosion protec-
tion, may only be carried out by CEAG/CCH
or a qualified electrician in compliance with
the applicable national rules
(IEC/EN 60079-19).
Prior to replacing or removing any components,
observe the following:
Cut the apparatus off the voltage before
opening it or carrying out repairs!
Before opening the enclosure ensure that
no potentially explosive atmosphere is
present
Only use certified genuine CEAG/CCH spare
parts (see CEAG/CCH spare parts list).
10
Disposal/Recycling
When the apparatus is disposed of, the
respective national regulations on waste disposal
will have to be observed.
In case of disposal you can obtain additional
information from your Cooper Crouse­Hinds /
EATON branch.
Subject to modifications or supplement of the
product range.
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exit n series

Table of Contents