Download Print this page

Welbilt Frymaster FilterQuick FQE30-T Installation, Operation And Maintenance Manual page 31

Advertisement

5.2.2 Error Messages and Display Problems
Problem
FQ4000 displays E19
HEATING FAILURE.
FQ4000 display is in
wrong temperature
scale (Fahrenheit or
Celsius).
FQ4000 displays
HOT-HI-1.
FQ4000 displays
HELP HI-2 or HIGH
LIMIT FAILURE
DISCONNECT
POWER.
FQ4000 displays
TEMPERATURE
PROBE FAILURE.
Heating indicator is
on, but fryer is not
heating.
FQ4000 displays
RECOVERY FAULT
and alarm sounds.
FQ4000 displays NO
MENU GROUP
AVAILABLE FOR
SELECTION
FQ4000 displays
SERVICE REQUIRED
followed by an error
message.
Probable Causes
Failed controller, failed transformer,
failed SIB board, open high-limit
thermostat.
Incorrect display option
programmed.
Frypot temperature is more than
410ºF (210ºC) or, in CE countries,
395ºF (202ºC).
Failed high limit
Problem with the temperature
measuring circuitry including the
probe or damaged controller wiring
harness or connector.
Three phase power cord unplugged
or circuit breaker is tripped.
Recovery time exceeded maximum
time limit.
All menu groups have been deleted.
An error has occurred which
requires a service technician.
Call your FAS for assistance.
Toggle between F° to C° by entering
Manager settings, temperature and
toggling the temperature scale.
Turn the controller on to check
temperature. If the desired scale is
not displayed, repeat.
Shut the fryer down immediately
and call your FAS for assistance.
Disconnect power from the entire
fryer immediately and call your FAS
for assistance.
Shut the fryer down and call your
FAS for assistance.
Verify that all power cord(s) are fully
seated in their receptacle(s), locked
into place and that circuit breaker is
not tripped If the problem continues
call your FAS for assistance.
Clear error and silence the alarm by
pressing the √ button. Maximum
recovery time for electric is 1:40. If
this error continues call your FAS for
assistance.
Create a new MENU group. Once a
new menu is created, add recipes to
the group (see section 1.10 of the
FQ4000 controller manual).
Press X to continue cooking and call
your FAS for assistance. In some
cases, cooking may not be available.
5-3
Corrective Action

Advertisement

loading