Welbilt Frymaster FQG120T Quick Start

FQG120T Quick Start
Basket
Holder
Control Panel
(FQ4000
A:
Controller
shown)
Power
Reset
Switch
USB
Port
Gas
Valve
Hose/Wand
Pump Switch
Hose/Wand
Handle
Connection
C: Oil Level Lines
NOTE: The Frymaster FQG120T fryer requires a start-up, demonstration and training be-
fore normal restaurant operations can begin.
Pre-Filter
B:
Pre-Filter
Screen Wrench
Screen
Top (Hot) OIL LEVEL line
Bottom (Cold) OIL LEVEL line
Flue
Cap
Top
Cap
Bezel
Filter
Pan
1. Fill vats with oil to lower fill line (C) .
2. Turn controllers on by pressing and
holding the button for three (3) sec-
onds.
3. Controller (A) displays "CHANGE FIL-
TER? YES/NO".
4. Press √ (YES) and controller displays
"REMOVE PAN".
5. Remove filter pan (B) and controller
displays "CHANGE FILTER".
6. Change filter and reassemble, ensur-
ing pan is out 30 seconds.
7. Re-install filter pan.
8. A "P" indicates the filter pan is not
properly placed. Reseat the filter pan
if necessary until the "P" is NOT visi-
ble.
9. While cooking, respond YES to the FIL-
TER NOW prompt in display (A) by
pressing the √ (YES) button and BLUE
filter button.
*8197648*
FRY_QR_8197648 05/2020