Related Manuals for SKF Lincoln PowerLuber A Series
Summary of Contents for SKF Lincoln PowerLuber A Series
- Page 1 Operation and maintenance PowerLuber grease gun Models 1860, 1862, 1864 series “A” Date of issue October 2016 Form number 404386C...
-
Page 2: Table Of Contents
Contents Intended use The PowerLuber was exclusively designed to Intended use. . . . . . . . . . . . . . . . . . . . . . . pump and dispense lubricant using 18 V bat- tery power. -
Page 3: Safety Instruction
Safety instruction 2.4 Do not abuse the cord. Never use the cord for carrying, pulling or unplug- General power tool safety warnings ging the power tool. Keep cord away from heat, oil, sharp edges or mov- ing parts. Damaged or entangled cords increase the risk of electric shock. - Page 4 4.7 Use the power tool, accessories and 3.6 Dress properly. Do not wear loose tool bits etc. in accordance with clothing or jewellery. Keep your hair, these instructions, taking into ac- clothing and gloves away from mov- count the working conditions and ing parts.
-
Page 5: Safety Of Others
Safety of others W A R N I N G This appliance is not intended for use by per- sons (including children) with reduced physical, Do not use any hose that has not been sensory or mental capabilities, or lack of expe- approved by Lincoln. -
Page 6: Vibration
Vibration W A R N I N G The declared vibration emission values stated in the technical data and the declara- To reduce risk of injury, user tion of conformity have been measured in must read the instruction accordance with a standard test method manual. -
Page 7: Protecting The Environment
Safety instructions for Protecting the environment battery and charger Save these instructions This manual contains important safety and op- Separate collection. This product erating instructions for Lincoln model 1850 must not be disposed of with nor- battery charger. mal household waste. Should you find one day that your Lincoln prod- uct needs replacement, or if it is of no further D A N G E R... - Page 8 Charger Do not attempt to charge 1 Before using this battery charger, read all damaged batteries. instructions and cautionary markings on battery charger, battery pack, and product using battery. Do not expose W A R N I N G battery to fire. Do not charge Lincoln model 1861 battery packs with any other charger.
-
Page 9: Electrical Safety
Electrical safety 10 Do not store the charger or battery packs in locations (such as a metal tool shed, or a car in the summer) where the temperature may reach or exceed 122.°F (50 °C) , which can lead to deterioration of the battery. 11 Do not charge battery pack when the tem- perature is below 32.°F (0 °C) or above 104.°F (40 °C). -
Page 10: Tool Use And Care
Tool use and care Specifications Basic PowerLuber Model 1860 Do not continue to hold down trigger if grease Operating.power 18.V gun is stalled. This could damage the motor or Maximum.operating.pressure cause fire. Low.output 7,500.psi.(517 bar) High.output 3,000.psi.(206 bar) Disconnect battery pack from tool before making any adjustments, changing accessories, Grease.reservoir.capacity 14 .5.oz ..(411 g) -
Page 11: General Description
Fig. 1 PowerLuber general components Item Description Coupler 1236.36.in . (91,4 cm).hose Vent.valve Bulk.fill.valve Pump.assembly 1861.battery Grease.tube Inspection General description The Lincoln PowerLuber is a battery operated Visually inspect for damaged, loose or missing grease gun developed for manual lubrication of parts. -
Page 12: Powerluber Set Up
PowerLuber set up Notice Air pockets in cartridge lubricant will cause gun to lose its prime Install/replace grease cartridge and will cause grease output measurements and cartridge level 1 Unscrew the grease tube assembly (17) readings to be inaccurate. from the grease gun († fig.1, pg. 11). 2 Pull back on the follower handle (21) and latch the follower rod groove into the slot on the tube cap. -
Page 13: Operation
Prime the grease gun Fig. 3 Prime the cordless grease gun after each re- fill or grease cartridge change. Priming instructions 1 Open vent valve (5) († fig.1, pg. 11). 2 Squeeze gun trigger until grease flows from vent valve. 3 Close vent valve. - Page 14 Grease flow monitoring Expelling air pockets (air purging) Some.OEM’s.recommend.the.exact.amount.of.. 1 Withdraw the follower rod from the grease grease.to.lubricate.critical.bearings . tube assembly cap and engage it with the follower by rotating the follower handle. Control/monitor grease application: 2 Unscrew.the.plug.of.vent.valve.3.to.4.turns .. Refer to the display representations in fig. 4. Exert.force.on.the.follower.handle.until.
- Page 15 Refilling options To fill gun with filler pump 1 Engage the follower rod with the follower To fill gun from bulk container by rotating the follower handle. 1 Remove pump assembly from grease tube 2 Insert the gun bulk fill valve (7) into the filler assembly.
-
Page 16: Charger Operation
Charger operation Fig.6 Charging the battery pack 1850 Before using your PowerLuber for the first time, the battery pack should be fully charged. If the battery pack is installed in the PowerLuber, remove it and follow “Charging Procedure” below. Lincoln chargers are designed to charge Lin- coln Lithium batteries in 30-60 minutes de- pending on the battery’s state of charge and temperature. - Page 17 Important charging notes 1 Longest life and best performance can be W A R N I N G obtained if the battery is charged when the air temperature is between 65° F and 75° F Never attempt to open battery pack for any reason.
-
Page 18: Exploded Views
Fig. IPB1 11.1 11.2 11.3 11.4 11.8 11.7 11.5 11.2 11.6 11.1 17.2 11.3 17.1 11.4 11.5 11.8 11.7 11.6... - Page 19 Service parts IPB1 Item Description Part.number Coupler.(model.1860) 5852 Flexible.hose.36.in ..(91 cm).w/gasket 286255 Gasket.(hose) 271884 Vent.valve 286315 LED.cover 286381 Bulk.fill.valve 286134 Pump.assembly 286384 Spring.selector 286113 Gear.selector 286097 Packing 34793 Follower.assembly 93499 Hose.clip 286376 Battery.18.V.(lithium) 1861 Handle 286090 Follower.rod 286091 Coupler.cap 286419* *.Indicates.change Service kits IPB1 Item...
-
Page 20: Service Parts List
Fig.IPB2 33.5, 34.2 33.4 33.3 33.2, 34.1 33.1 32.1 34.3, 41.2 32.2 31.1 32.3 36.1 37, 36.2 32.4 32.5 31.2, 32 32.6 31.3 32.7 32.8 42.2 32.9 42.1 41.1 34.3, 41.2 Assembly note: Seal lips on seal (37) must be pointed toward the grease side of the pump unit block. - Page 21 Service parts IPB2 Item Description Part.number Seal 271889 Driver.assembly 286285 Roller 286111 Stud 286110 1).Also.included.in.Driver.Assembly.Kit.286285 ... Service kits IPB2 Item Description Part.number Check.valve.kit 280162 30 .1 Copper.gasket 30 .2 Spring 30 .3 Ball 30 .4 Spring.housing Housing.with.bearing 286394 31 .1 Pump.housing 31 .2 Gear.ring,.3rd.stage...
-
Page 22: Troubleshooting
Fig.7 Wiring diagram Terminal block Switch Red wire,UL 1332 16 AWG, Red wire,UL 1332 16 AWG,140 mm Length is 330 mm from switch to motor Black wire, UL 1332 16 AWG,190 mm Blue wire, UL 1332 16 AWG, 190 mm Blue wire, UL 1332 16 AWG, Yellow... - Page 23 Declaration of conformity according to Declaration of Confomrity as defined by EMC directive 2004/108/EC. Machinery Directive 2006/42/EC. We declare that the model of the We declare that the model of the PowerLuber PowerLuber Grease Gun - Battery Charger Grease Gun in the version supplied by us com- in the version supplied by us, complies with the plies with the provision of the above mentioned provisions of the above mentioned directive.
-
Page 24: Warranty
General.Conditions.of.Sales,.which.are.avail- able.at:.www .lincolnindustrial .com/technical- service.or.www .skf .com/lubricatio ® SKF is a registered trademark of the SKF Group. ® Lincoln is a registered trademark of Lincoln Industrial. © SKF Group 2016 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted.
Need help?
Do you have a question about the Lincoln PowerLuber A Series and is the answer not in the manual?
Questions and answers