Placing A Call; Receiving A Call - Plantronics T10 User Manual

STEP 3

PLACING A CALL

With the Headset in position, place a call by pressing the
On/Off Button (In-use Indicator
11
Lights are on). Listen for dial tone.
2
Dial the desired number using the Twelve Button Dial Pad
When your party answers, speak normally. If your party cannot
hear you, see Troubleshooting (page 10).
Adjust the Listen Volume Control
13
other party.
REDIAL FEATURE
The base unit will store the last number dialled. The last number
can be automatically redialled by pressing the Redial Button

RECEIVING A CALL

With the Headset in position, when the ringer notifies you of
an incoming call, press the On/Off Button
(In-use Indicator and On Line Indicator Lights
12
and On Line Indicator
12
.
3
as needed to hear the
.
14
to answer the call
11
are on).
2
8
FEATURES
FLASH FEATURE
If your telephone service includes call waiting, the Flash Button
allows you to toggle between two calls. When your phone alerts
E you to a second call, press the Flash Button
call on hold and to immediately connect you to the second call.
Press the Flash Button again to return to the first caller.
This feature can also be used with most office telephone systems
to transfer a call to another extension. Press Flash to hear a dial
tone, enter the extension number, after the extension rings, press
Flash again or hang up to transfer the call.
MUTE FEATURE
When you activate the Mute Button
hear your voice but you will be able to hear the calling party.
TONE FEATURE
The treble and bass quality of the incoming call can be adjusted
by moving the Tone Control
to place the current
7
, the calling party cannot
9
.
15
9
7