Placing A Call With Your Headset And Bluetooth Mobile Phone; Answering And Ending Calls With Your Headset And Bluetooth Mobile Phone - Plantronics Voyager PRO UC v2 User Manual

Placing a Call with your Headset and Bluetooth Mobile Phone

To place a call
Redial last number*
Activate voice dialing*
* Only available on mobile phones that support these features.

Answering and Ending Calls with your Headset and Bluetooth Mobile Phone

To answer a call
To answer a call when already
on an active Lync/Microsoft
Office Communicator call
To end a call
Redial last number*
Reject a call
Transfer a call from your
mobile phone to your headset
Transfer a call from your
headset to your mobile phone
* Only available on mobile phones that support this feature.
Dial number on your mobile phone keypad.
Double press call button. There will be a double low tone on each press.
A final tone indicates the last number has been redialed.
Press and hold call button for two seconds. First tone on key press start
followed by a second tone which indicates voice dial is activated.
Short press call button.
Short press the call button to end the Lync/Microsoft Office
Communicator call, then press again to answer your mobile phone call.
Short press call button.
Double press call button. There will be a double low tone on each press.
A final tone indicates the last number has been redialed.
Press call button for one second until you a single low tone.
While on a call, press the call button for one second until you hear a
single tone followed by double low tones.
While on a call, press the call button for one second until you hear a
single tone followed by double low tones.
15