Related Manuals for MSA PremAire Cadet Escape Respirator
Summary of Contents for MSA PremAire Cadet Escape Respirator
- Page 1 PremAire ® Cadet Escape Respirator: Carrier and Harness MAINTENANCE AND REPAIR MSA 014 (L) Rev. 0 © MSA 2010 Prnt. Spec. 10000005389 (I) Mat. 10110431 Doc. 10110431...
- Page 2 Nylon Bag Carrier for 10 minute carbon cylinder 10061354 Kevlar Bag Carrier for 10 minute carbon cylinder 10078802 Nylon Bag Carrier for 15 minute carbon cylinder 10078803 Kevlar Bag Carrier for 15 minute carbon cylinder MSA 014 (L) Rev. 0 - 10110431...
- Page 3 Discard the o- rings. Note: Be careful not to scratch the o-ring groove. 5. Pass the clamps through the carrier straps. 2. Remove the ring from the split ring. MSA 014 (L) Rev. 0 - 10110431...
- Page 4 Breathing Apparatus or Combination, Open- Circuit, Pressure-Demand, Escape, Self- Contained Breathing Apparatus and Type C, Supplied-Air Respirator, Operation and Instructions (P/N 10063148) for instructions on converting to left-hip mounting. MSA 014 (L) Rev. 0 - 10110431...
- Page 5 3. Pass the waist strap through the shoulder strap. a. Position the clamps at the edges of the Note: Make sure the label. stiffener is properly oriented. MSA 014 (L) Rev. 0 - 10110431...
- Page 6 4. Attach the hose strap to the ring. c. Use the o-ring removal tool to slide the o-ring into the groove. Note: Be careful not to scratch the o-ring groove. MSA 014 (L) Rev. 0 - 10110431...
- Page 7 125 +/- 25 in.lbs. 2. If necessary, use an 11/16” crowfoot and inch-pound torque wrench to connect the second stage regulator hose and tighten to 125 +/- 25 in.lbs. MSA 014 (L) Rev. 0 - 10110431...
Need help?
Do you have a question about the PremAire Cadet Escape Respirator and is the answer not in the manual?
Questions and answers