11
12
5
When "Confirmation of the connection method" screen appears, connect the printer to
the computer with the USB cable.
A
18
1
2
11. Check [Always trust software from
"CANON FINETECH NISCA INC."]
checkbox.
12. Click [Install].
To select a connection destination port, click
[Select manually...], and then select it.
The selected destination port can be changed
after completing of installation of the printer
driver.
1. Connect the printer to the computer
with a USB cable.
2. Secure the USB cable in place with the
clamp (A).
If using a USB cable with a core, it may not be
possible to set the cable with the clamp. In this
case, allow some slack from the cable and insert
it in the groove on the rear panel.