Electrolux E6WHPED3 Installation Instruction page 4

15. For tumble dryer. Screw the rear
4
brackets (C) to the back of the
appliance by using the screws
10. Use the screws supplied to secure the
removed in step 12 and adjust the
rear brackets (B) on both the washer
appliance feet if required.
and the pedestal.
11. For washing machine. Put the
pedestal and appliance in vertical
11. Put the pedestal and appliance in
position. If necessary, adjust the
vertical position. If necessary, adjust
the appliance feet and go to step
appliance feet and go to step 16.
12. Check that the screws are firmly
Check that the screws are firmly
screwed.
screwed.
16. Move the Pedestal/Appliance
12. For tumble dryer. Unscrew and
assembly to its permanent
12. Move the Pedestal/Appliance
retain the two bottom screws from
location. Use a spirit level to check
assembly to its permanent location.
the back of the appliance.
Use a spirit level to check if the if the assembly is properly leveled.
assembly is properly leveled. If not
If not leveled, adjust feet to level
leveled, adjust feet to level properly.
properly.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
17. Where included, you can insert
the additional container (F).
13. Where included, you can insert the
17. Where included, you can insert
additional container (F).
the additional container (F).
18. Connect the appliance as indicated
14. Connect the appliance as indicated
in the instructions supplied with the
in the instructions supplied with the
appliance.
appliance.
5
6