Electrolux E6WHPED3 Installation Instruction page 19

15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
10. Brug de medfølgende skruer til at
removed in step 12 and adjust the
fastgøre de bageste beslag (B) på
appliance feet if required.
11. For washing machine. Put the
både vaskemaskinen og soklen.
pedestal and appliance in vertical
position. If necessary, adjust the
11. Rejs soklen og apparatet op i lodret
appliance feet and go to step 16.
position. Justér om nødvendigt
apparatets fødder, og gå til trin 16,
Check that the screws are firmly
Kontrollér, at skruerne er spændt.
screwed.
16. Move the Pedestal/Appliance
12. For tumble dryer. Unscrew and
assembly to its permanent
12. Flyt soklen/apparatet til sin perma-
retain the two bottom screws from
location. Use a spirit level to check
nente placering. Brug et vaterpas til
the back of the appliance.
if the assembly is properly leveled.
at kontrollere, at enheden er i vater.
If not leveled, adjust feet to level
Justér fødderne, hvis dette ikke er
tilfældet.
properly.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
17. Where included, you can insert
the additional container (F).
17. Where included, you can insert
13. Hvis der medfølger en ekstra
the additional container (F).
beholder, kan du indsætte denne (F).
14. Tilslut apparatet som angivet i den
18. Connect the appliance as indicated
medfølgende vejledning.
in the instructions supplied with the
appliance.
5
19