Vantec NEXSTAR NST-350U2 User Manual page 9

4) Hook the bottom cover in place to cover the bottom of the unit (see image
below). Repeat for top cover.
5) Using the included screws (smaller ones), secure the covers onto the case.
(see image below)
Note: When removing the hard drive from the NexStar, be careful not to yank on the IDE
cable or the power cable. To remove the IDE cable, grasp the cable between your thumb
and index finger and gently pull at the sides until the cable comes loose. To remove the
power cable, grasp the sides of the plug and pull.
7