Table of Contents
Advertisement
5. Installation:
NexStar External 3.5" HDD Enclosure:
5.1. Hardware Installation:
Installing the hard drive:
1) Set the hard drive jumpers to MASTER or SINGLE DRIVE ONLY. Please refer to
the documentation included with your hard drive for information on how to
accomplish this.
2) Connect the IDE Connector and the Power Molex from the NexStar to your
hard drive (see image below).
3) Using the included screws (larger ones), screw the hard drive onto the case
through the holes on the bottom of the body (see image below).
IDE Connector
6
Power Molex
Hide quick links:
Advertisement
Table of Contents
