Programme End; Child Lock Function; After Use - Kogan 8 Series Manual

Heat pump dryer
Hide thumbs Also See for 8 Series:
Table of Contents

Advertisement

20/03/2020
 

Programme End

All drying programmes will end with a 10-minute cooling phase.
If the laundry is not removed at the end of the cycle, the dryer will run an anti-crease phase - the default duration is 30
minutes and it can be set up to 120 minutes.
If the laundry is not removed at the end of the Anti-Crease phase, the display will show "End" and the buzzer will sounds
for 15 seconds if enabled. To finish, turn the programme selector dial to off.

Child Lock Function

Press and hold "Time" and "Dry Level" together to toggle the child lock function on or off. With the child lock active, only
the "Off" button will function.
The function will be cancelled if the door is opened during operation, the filter drawer is removed during operation or if
the water tank becomes full.

After Use

If the drying programme has to be stopped before it reaches the end, it is recommended to run the cooling phase before
removing the laundry so excess heat can dissipate.
Turn the dial to "Off" and then to "Refresh" before pressing the "Start" button.
https://help.kogan.com/hc/en-us/articles/360043702734
Kogan 8kg Series 8 Heat Pump Dryer - (KAG8PUMPDYA) - Manual – Kogan.com Help Centre
Child lock light: Indicates that the appliance is locked.
Buzzer light: Indicates that the buzzer programme is selected.
Delay start light: Indicates that the delay start programme is selected.
Drying type light: The light for the appropriate set drying intensity will be on
Tank full light Comes on after each programme and also when the water tank is full,
reminding you to empty the water container.
13/23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kag8pumpdya

Table of Contents