Indicator Lights - Kogan 8 Series Manual

20/03/2020
This button allows you to delay the start of the programme by up to 24 hours in intervals of 1 hour. This option must be
selected after setting the programme and before pressing Start/Pause to commence drying.
When Start/Pause is pressed, the corresponding indicator lights will flash. Other indicator lights will be off except for
Delay Start pilot light.
Display
Along with the programme time countdown, the following items are displayed:
Delayed start
If you have set a delay timer, the remaining time will be displayed in hours.
Press the Delay Start button again to show the duration of the set programme.
Incorrect option selection
If you select an option that is not compatible with the programme you have selected, the display will show ErS
(error).
Start/Pause
Use the Start/Pause button or open the door to pause during operation. Only Start/Pause, Anti Crease and Buzzer
controls will work. To re-start the programme, press the Start/Pause button once again with the door shut.

Indicator lights

https://help.kogan.com/hc/en-us/articles/360043702734
Kogan 8kg Series 8 Heat Pump Dryer - (KAG8PUMPDYA) - Manual – Kogan.com Help Centre
Drying light: Indicates that the appliance is in the drying phase.
Cooling light: Indicates that the appliance is in the cooling phase.
End of programme light: Indicates the cooling phase is complete.
Anti-creasing light: Indicates the anti-creasing programme is selected.
Filter light: Comes on during every cycle to remind you that the filter must be cleaned at the
end of the programme.
12/23