Advertisement
Quick Links
UltimusPlus Dispenser Network Connection
Instructions
Introduction
This document provides procedures for connecting the UltimusPlus
commands to the dispenser, including commands to remotely switch dispense programs.
Connecting the Dispenser to a Computer
1.
Switch ON the dispenser power.
2.
Using standard Ethernet cables and an Ethernet switch, connect a personal computer with a static IP address to the
Ethernet port on the back of the UltimusPlus dispenser.
3.
To set up your computer with the correct IP settings, continue to "Setting the IP Address of a Computer" on page 2.
fluid dispenser to a network and then sending
™
Power ON
Ethernet cable
Ethernet
switch
Ethernet cable
Making the Ethernet connection between the
UltimusPlus dispenser and a computer
Ethernet
port
Advertisement
Related Manuals for Nordson UltimusPlus
Summary of Contents for Nordson UltimusPlus
- Page 1 Using standard Ethernet cables and an Ethernet switch, connect a personal computer with a static IP address to the Ethernet port on the back of the UltimusPlus dispenser. To set up your computer with the correct IP settings, continue to “Setting the IP Address of a Computer” on page 2.
- Page 2 Select “Local Area Connection” (Windows 7) or “Ethernet” (Windows 10). Windows 7 Windows 10 Double-click (Windows 7) or right-click (Windows 10) to select “Properties.” Windows 7 Windows 10 www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
- Page 3 • “Using Tera Term to Communicate with the Dispenser” on page 4 • “Using PuTTY to Communicate with the Dispenser” on page 5 www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
- Page 4 Using Tera Term to Communicate with the Dispenser Once the computer is connected to the UltimusPlus dispenser, open a command prompt (or a terminal) and ping the IP address of the UltimusPlus dispenser. The default IP address of the dispenser is 192.168.10.40.
- Page 5 Using PuTTY to Communicate with the Dispenser Once the computer is connected to the UltimusPlus dispenser, open a command prompt (or a terminal) and ping the IP address of the UltimusPlus dispenser. The default IP address of the dispenser is 192.168.10.40.
- Page 6 Unit switches to program 15 Program16_0 Program16_0 Unit switches to program 16 DispenseTrigger_0 TriggeringDispense_0 If in timed mode, unit triggers a dispense For Nordson EFD sales and service in over 40 countries, contact Nordson EFD or go to www.nordsonefd.com. Global 800-556-3484; +1-401-431-7000 info@nordsonefd.com Europe 00800 7001 7001 infoefd.europe@nordsonefd.com...