Rugged Ridge 11570.10 Quick Start Manual

Contents:

1. Tube Bumper (1)
2. Filler Panel (1)
3. Left Plate (1)
4. Right Plate (1)
5. 12mm Washer (4)
6. 12mm Bolt (4)
7. 6mm Washer (4)
8. 6mm Button Head Screw (2)
9. 6mm Lock Nut (2)
1. Remove original rear bumper. It is held in by 2 bolts on each side (Figure 1a), and 2 bolts that are
attached to brackets which fasten to the rear crossmember (Figure 1b). After the bumper is
removed, remove the small brackets from the rear crossmember (Figure 1c).
Figure 1a
2. Place Filler Panel on rear frame rails (Figure 2). No fasteners are to be installed yet.
2007 Jeep JK Wrangler Rear Tube Bumper
®
3
5
6
1
2 8
Figure 1b
Figure 2
Page 1 of 2
11570.10 (Black)
11571.10 (Textured Black)
11573.10 (Stainless Steel)
Figure 1c
7
4
5
6
9