Page 1
5 SERIES FIXED ® Owner’s Manual INSTALLERS: PLEASE BE SURE TO LEAVE THIS MANUAL WITH THE OWNER. THANK YOU!
Page 2
APPLY S/N STICKER HERE ® LIMITED ONE YEAR WARRANTY ON SCREEN INNOVATIONS PRODUCTS Screen Innovations warrants its products, to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser provided they are properly operated according to Screen Innovations’...
Page 3
5 SERIES FIXED 512-832-6939 9715-B Burnet Road Suite 400, Austin,TX 78758 SCREENINNOVATIONS.COM...
Page 9
STANDARD Set screws should be finger tightened only at this time.
Page 10
STANDARD A = B Square the frame using a carpenters square or tape measure. Tighten the set screws using the provided allen tool. DO NOT use an impact or drill to tighten the set screws as it will damage the frame.
Page 11
Frame Installation SPLIT Hardware Kit (MAESTRO ONLY) Larger screens are shipped with slot nuts, bolts, and vertical support bars. These must be installed on large, split frame screens, or wall brackets must be installed top and bottom.
Page 16
SPLIT A = B Square the frame using a carpenters square or tape measure. Tighten the set screws using the provided allen tool. DO NOT use an impact or drill to tighten the set screws as it will damage the frame.
Page 17
5 SERIES FIXED Material? SL ATE & PURE SHORT THROW MAESTRO...
Page 19
Material Installation SLATE/PURE Starting in the middle of each horizontal and vertical, snap/bungee the mid- dle of each side, then work your way outward, completing a side at a time.
Page 20
SLATE/PURE Backer Installation For AT Material Only Black backer material 10X S Hooks 10X Bungees (included with material roll) Acoustically Transparent (AT) materials come with a black backer that must be installed to eliminate shine through. Unroll the black backer material over the screen material. Hook the S hooks into the channel in the frame and then attach to the holes in the black backer material.
Page 21
SHORT THROW WHEN HANDLING AND UNROLLING THE SHORT THROW MATERIAL DO NOT KINK IT! Once the material is kinked it is permanently damaged.
Page 22
SHORT THORW Starting in the middle of each horizontal and vertical, snap/bungee the middle of each side, then work your way outward, completing a side at a time.
Page 23
MAESTRO Material Installation Insert the tensioning rods into the pockets as shown. Maestro material has a black backer that must be installed with the viewing material to eliminate shine through.
Page 24
MAESTRO Starting in the middle of each horizontal and vertical, snap/bungee the middle of each side, then work your way outward, completing a side at a time.
Need help?
Do you have a question about the FIXED 5 Series and is the answer not in the manual?
Questions and answers