SI Sensation Series Installation Manual

Sensation Series Fixed Frame Screen

U.S.Screen Corp.

Thank you for purchasing a Screen Innovations projection screen.

2105 Denton Drive

Before use, please read instructions carefully. After installation, store instructions for future reference.

Austin, TX 78758

P (512) 832-6939

F (512) 832-6136

www.screeninnovations.com

Table of Contents

Need help?

Do you have a question about the Sensation Series and is the answer not in the manual?

Page 1 Installation Guide for Sensation Series Fixed Frame Screen U.S.Screen Corp. Thank you for purchasing a Screen Innovations projection screen. 2105 Denton Drive Before use, please read instructions carefully. After installation, store instructions for future reference. Austin, TX 78758 P (512) 832-6939 F (512) 832-6136 www.screeninnovations.com...
Page 2 Description Warnings When installing, make sure it is facing forward. The back of the screen will be labeled with a sticker. Top bracket Please read the following as any damage to the screen surface will affect the quality of the picture: 1.The frame is made with lightweight aluminum.
Page 3 7. Uplift the assembled screen to make sure Up groove meet with Top bracket, and the frames are matched Installation on brackets ideally. (Figure 19-20) Take out all the parts from the packaging and follow the accessories guideline to ensure you have all parts, then install the screen as below.
Page 4 4. Unfold screen fabric and insert 4 Tensioning bars seperately into 4 different fabric grooves, be careful not 6. The Top brackets' length is at half of Horizontal frames'. And there is 5 groups of holes on bracket with 10cm to poke the fabric.