Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ITEM Linear Unit LRE 8 D14 80x40 KU 80
Summary of Contents for ITEM Linear Unit LRE 8 D14 80x40 KU 80
- Page 1 Linear Unit LRE 8 D14 80x40 KU 80 Notes on Use and Installation...
-
Page 2: Table Of Contents
Linear Unit LRE 8 D14 80x40 KU 80. The text below usually refers being used. -
Page 3: Correct Use
Correct use Linear Unit LRE 8 D14 80x40 KU 80 with Controller and Motor is a partly com- ▪You are appropriately qualified, pleted machine as defined in the Machinery Directive (2006/42/EC). It must ▪You are authorised to do so by your company,... -
Page 4: Operating Parameters
Operating parameters Linear Unit LRE 8 D14 80x40 KU 80 is generally constructed from Line 8 profiles that have been cut to size and various assemblies. Before starting installation work, it is important to check that all parts are present. -
Page 5: Preparation
Preparation Support profile, e.g.: Profile 8 80x40 Guide, e.g.: Roller guide D14 Drive, e.g.: Chain ½” and Chain Reverse Unit 8 80 Fundamentally, a Linear Unit converts a rotary motion into a translational These components are picked for assembly and assembled in part or in full, motion. -
Page 6: Slide Lrf 8 D14 160X160/200X160
Slide LRF 8 D14 160x160/200x160 Slide LRF 8 D14 160x160 Once the support profile has been machined, prepared and connected with the The LRF guide carriages in the various sizes as appropriate to the width of the Shaft-Clamp Profiles, the guide carriage can be slotted into place on it. support profile are partially assembled. -
Page 7: Potential Applications
Application options In combination with Profile 8 80x40 as a support profile and Slide LRF 8 D14 160x160: 70.4 12 h9 Ø14 The Slides have a flat surface for accommodating application-specific mounting holes. The practical positioning collars ⌀12 h9 ensure that applications are mounted with exceptional precision. -
Page 8: Basic Construction Of The Chain And Chain Reverse Unit
Basic construction of the Chain and Chain Reverse Unit Chain Guide Profiles 8 must be pushed into the profile grooves before the Chain Reverse Units are fastened to the frame profile. Measure the length of Chain Guide Profiles 8 so they overhang each side of the frame profile by 25 mm. - Page 9 Connecting Drive Set KGT D40/D15 - 0.0.667.76 Connecting Drive Set 8 40 D40/D15 – 0.0.668.02 The Chain is driven at Chain Reverse Units 8 80. The housings of the Chain Reverse Units feature a thread for screw-attaching Drive Set 8 40 D40/D15. [mm] 8 40 D40/D15 ⌀...
-
Page 10: Connecting Drive Set 8 D40/D15 Ap
Units from item are automatically fitted with a Slide Stop that can be moved for the system. Thanks to its special shape, the Slide Stop can be used with to a different position or removed entirely, as required. - Page 11 This position does not need to match the maximum travel, but rather can be adapted to the transport task at hand. Linear Unit LRE 8 D14 80x40 KU 80 L = Gesamtlänge in Abhängigkeit von Hub H...
-
Page 12: Synchronising The Ilmu
Coupling. How long a Synchroniser Shaft can be depends on its operating speed. To determine the maximum length for a given speed Synchronising Sets from item can be used to operate two Linear Units in paral- or the maximum speed for a given length, please consult the information lel with just one motor. -
Page 13: Maintenance
Any visible trace of erosion on the edges of the teeth is an indication that these drive components Synthetic lubrication oil ISO VG 460, e.g. item Track Oil for Linear Guides also need to be replaced. - Page 14 Industrietechnik GmbH Friedenstrasse 107-109 42699 Solingen, Germany Germany You can find the Notes on Use and Instal- Telephone +49 212 6580 0 lation online, in the download section for Fax +49 212 6580 310 this product. info@item24.com item24.com...
Need help?
Do you have a question about the Linear Unit LRE 8 D14 80x40 KU 80 and is the answer not in the manual?
Questions and answers