If no station can be received, "-– –" will appear in the display. The system will tune
to the station which was being received before the ATP function was selected.
If there are less than 6 stations which can be received, the system will memorize
these stations and start receiving the one memorized
. . . .
This function scans each of the preset stations stored in the selected band (both manual presets and auto trav-
To scan .
Select the desired band or ATP mode. Press button @ for FM1, FM2, LW or MW band, or
press button @ for less than 0.5 seconds for ATP mode.
Press button 0. The system will sequentially
receive each preset station for 5 seconds.
To hold the station, press button@
again during this five second period.