Irda Transceiver With Endec; Power And Communication Interfaces - ZiLOG Z8F64200100KITG User Manual

IrDA Transceiver with Endec

The Z8 Encore! XP
mance UART with Infrared Encoder/Decoder (Endec). The Infrared
Endec is integrated with an on-chip UART to allow easy communication
between the Z8 Encore! XP Z8F642 and IrDA transceivers. Infrared com-
munication provides secure, reliable, low-cost, point-to-point communi-
cation between PCs, PDAs, cell phones, printers and other infrared
enabled devices.

Power and Communication Interfaces

Table 1
functions and devices affected by selected jumpers.
Table 1. Jumpers JP3 and JP4
Jumper
JP3
JP3
JP4**
JP4
* These jumpers must not be OUT at the same time.
** If the module is plugged onto an eZ80
demonstration board the local RS-232 can be disabled by connecting header JP2
pin 50 to the corresponding GND on the mating connector.
F64XX Series Development Board
Z8 Encore! XP
®
Z8F642 contains a fully-functional, high-perfor-
provides jumper information concerning the shunt status,
Status
OUT*
IN
OUT*
IN
®
F64XX Series Development Kit
Device
Affected Status
IrDA Enable
interface
IrDA Disable
interface
RS-232 Enable
RS-232 Disable
®
Development platform or eZ80
User Manual
9
Default
X
X
UM015110-0508