Hd 18x optical zoom camera with 3-axis gimbal (5 pages)
Summary of Contents for Foxtech FH336-TR
Page 1
(3rd Floor) No.9 Haitai Fazhan Sixth Avenue Add: XiQing District Tianjin China Web: www.foxtechfpv.com FH336-TR HD 36X Optical Zoom Camera with 3-axis Gimbal Warning and Disclaimer Make sure not to adjust the gimbal or change its mechanical structure by yourself. Be sure to mount the camera to gimbal before power on,and then install the gimbal on the aircraft.
Page 6
FOXTECH HOBBY Co., Ltd (3rd Floor) No.9 Haitai Fazhan Sixth Avenue Add: XiQing District Tianjin China Web: www.foxtechfpv.com GPS data overlay and serial port wiring diagram GPS Baud rate:115200,8,1,null Serial ports will be needed(marked by the black box,see photo above),please connect RX1 and RX2,TX1 and TX2,with wire jumper.TX and RX from external serial cable...
Page 7
FOXTECH HOBBY Co., Ltd (3rd Floor) No.9 Haitai Fazhan Sixth Avenue Add: XiQing District Tianjin China Web: www.foxtechfpv.com Gimbal control 1)Yaw axis control: speed mode, connect stick channel(or 3-position switch channel, push stick to middle position to stop) 2)Pitch axis control: speed mode, connect stick channel(or 3-position switch...
Page 8
FOXTECH HOBBY Co., Ltd (3rd Floor) No.9 Haitai Fazhan Sixth Avenue Add: XiQing District Tianjin China Web: www.foxtechfpv.com Mode function description(connect “MODE”to knob channel) Rotate knob to position-3:low speed lock mode.The gimbal will move at the lowest speed when controlling YAW and PITCH, and gimbal YAW axis will not follow drone flight direction.
Page 9
FH336-TR 36X with tracking connect block controller box HDMI : micro HDMI OUTPUT 1080P 60fps default SD card: max 128G ,class10 FAT32 or exFAT format PWM in 5V output USER BOARD TTL 115200/8/1/N...
Page 10
S.bus/Rx : connect to Rx2 for track function. Roll/ Tx : connect to Tx2 for track function. Pitch: : PWM in, pitch control 1 pitch up 2 pitch stop 3 pitch down Yaw : PWM in, Yaw control 1 PITCH UP 俯仰向上 1 Yaw right 2 PITCH STOP 俯仰停止...
Page 11
ZOOM: zoom the camera focus : focus the camera 1 focus tele 1 zoom tele 2 stop focus 2 stop zoom 3 focus near 3 zoom wide Pic/Rec : picture / start record, stop record Switch 2 to 1: start record stop record.
Need help?
Do you have a question about the FH336-TR and is the answer not in the manual?
Questions and answers