Table of Contents
Advertisement
MAINTENANCE
5. When installing, bring the packing surface into contact with the seal surface of the filter holder, then tighten a
further 3/4 - 1 turn.
q When using a filter wrench for tightening, be extremely careful not to damage the filter or cause dents.
6. After replacing the filter cartridge, add oil through oil filler
port (F) so that the oil level is between the H and L marks
on dipstick (G).
7. Run the engine for a short time at low idling, then stop the
engine. Check that the oil level gauge is between the H
and L marks. For details, see "Check Oil Level in Engine
Oil Pan, Add Oil (3-78)".
8. Install cover (1).
MAINTENANCE PROCEDURE
4-57
Advertisement
Table of Contents
