Table of Contents
Advertisement
OPERATION
MACHINE OPERATIONS AND CONTROLS
Machine front drain
Machine rear drain
6. After checking oil level or adding oil, fully insert dipstick (G) into the filler pipe.
Check Oil Level in Coupling Case, Add Oil
WARNING
Parts and oil are at high temperature immediately after the engine is stopped and may cause serious
burns. Wait for the oil temperature to go down before performing this operation.
NOTICE
Park the machine on flat ground and stop the engine. After waiting for more than 30 minutes after stop-
ping the engine, check the oil level.
1. Open up the front left side cover of the engine hood, and
check the oil level with oil level gauge (G).
3-83
Advertisement
Table of Contents
