Table of Contents
Advertisement
DETAILED CONTROLS AND GAUGES
Operation with Cold Air to Face and Warm Air to Feet
To operate with cold air blowing to the face and warm air blow-
ing to the feet, set as follows.
1. Press fan switch (2) and adjust the air flow. When doing
this, check that temperature setting (a) and air flow (b) are
displayed on monitor (7).
2. Press vent selector switch (4) and set the vent display on
the display monitor to the display shown in the diagram on
the right.
3. Turn air conditioner switch (8) ON. Check that the lamp
above air conditioner switch lights up.
4. Adjust fan switch (2), temperature setting switch (3) and
RECIRC/FRESH selector switch (6) to the desired posi-
tions.
3-60
OPERATION
Advertisement
Table of Contents
