Advertisement
BEFORE FIRST USE
CAUTION: Handle chopping blade carefully.
•
Carefully remove all packaging material, any stickers and the plastic protector from the
power plug.
•
As some parts may be packed separately, check to ensure all items have been unpacked
before disposing of the packaging.
•
All parts need to be thoroughly cleaned before being used for the first time (see 'Clean
section').
•
Remove and save instruction booklet.
ASSEMBLY OF THE ATTACHMENTS
•
To fit the blending leg or whisk attachment, insert the motor unit into the blending leg or
whisk holder and twist it in a clockwise direction until it locks into place.
•
When using the mini-chopper, fit the mini-chopper lid onto the mini-chopper. Then, insert
the motor unit into the hole on top of the lid and turn in an anti-clockwise direction until it
locks into place.
•
To detach an attachment, twist it in the opposite direction until the two parts separate.
IN USE
1.
Put the plug into the wall power outlet.
2.
Press the low speed button for low speed, release it to switch off.
3.
Press the high speed button for high speed, release it to switch off.
• Large quantities, thick mixes, and a high ratio of solids to liquids require longer timings
and slower speeds.
• Smaller quantities, thinner mixes, and more liquids than solids require shorter timings and
higher speeds.
USING THE BLENDING LEG
The blending leg is ideal for preparing sauces, soups, cocktails, milk-shakes, mayonnaises and
baby food preparations.
•
Attach the blending leg to the motor unit (see 'Assembly of the attachments').
•
Insert the plug into a wall power outlet and switch the outlet on.
•
To avoid splashing, place the blending leg into your preparation before operating the hand
blender.
•
Press and hold the Low (I) or High (II) speed button to start the motor.
•
Make a rotating, up and down motion to obtain even blending of the food.
Note: Do not immerse the blending leg past the top of the metal tube.
Note: When using it in hot liquids, do not let the blade break the surface at an angle, as you
might spray liquid outside the bowl/pan/container.
•
Release the button to stop the motor.
•
After use, switch off the wall power outlet and remove the plug.
•
To disengage the blending leg from the motor unit, hold the 2 parts and twist to unlock.
5
Advertisement
