Confidential
1.5 Example Platen Open Signal Detection Circuit
1) The example circuit for detecting the platen open signal is as shown in Figure 1.5.1.
[Printer side]
Figure 1.5.1 Example Paper-end Signal Detection Circuit
2) To detect a platen open, sample the signal in a cycle of 1 ms or less. If open is found, the platen is
unloaded.
3) Energizing an unloaded print head for a long period may shorten its life.
4) Never drive the paper feed motor when the platen is unloaded (mechanical switch off).
EPSON
3.3 kΩ
0.1 µF
3.3 kΩ
TITLE
M-T123
Designer's Guide
(STANDARD)
VDD 5V
74HC14
Platen open detection signal
[User side]
SHEET
REVISION
A
NO.
NEXT
SHEET
5
4