HySecurity HyNet SFP 4/1 Installation Manual page 2

HyNet Components
LED Indicators
1 2 3
Height
1¼ inches
Mounting Plate
4 x 7½ inches
LED Position
1
1
2
2
2
3
3
3
4
4
Drawing is not to scale
www.SecureOpeners.com | (800) 878-7829 | Sales@SecureOpeners.com
4
RS-485
Micro SD Card Slot
USB OTG
Table 1: HyNet LED Indicators
LED Color
RED flashing
Green steady
RED steady
RED flashing
GREEN flashing
RED steady
RED flashing
GREEN steady
Red steady or no LED lit
GREEN steady
Micro USB
Reset Button
LED (position 1)
No communication from gate operator to HyNet.
Communication is established between gate operator and HyNet.
Gate operator network communication is not configured or established.
HyNet is attempting to connect to network (web interface).
Network (web interface) is established and working. (May not be wholly
configured, yet. Verify configuration with your IT administration.)
Hardware fault.
Charge is low on coin battery. Replace coin battery.
Hardware functioning and coin battery charged.
HyNet internal switch is not functioning.
HyNet internal switch is functioning.
SFP Module
(100/1000/2500)
Managed Switch
RJ-45 Integration Hub
4-Port Copper Gigabit
(100/1000/2500)
Indicates