HySecurity HYNET SFP 4/1 User Manual
Hide thumbs
Also See for HYNET SFP 4/1:
- Installation manual (8 pages) ,
- Installation manual (8 pages) ,
- Installation manual (8 pages)
Table of Contents
Advertisement
Quick Links
PC Laptop or desk top
NOTICE: Network configuration settings may require the assistance of an Information Technology (IT)
administrator. Incorrect settings could interfere with the site's Local Area Network (LAN) and HyNet™
operation. Consult with your IT administrator and plan accordingly.
Click on Getting Started for a list of items you will need to begin configuring and installing HyNet Gateway.
User Guide
Remote Power Supply
HyNet Gateway
Interconnect
Cable
Access to Internet
Advertisement
Table of Contents
Related Manuals for HySecurity HYNET SFP 4/1
Summary of Contents for HySecurity HYNET SFP 4/1
-
Page 1: User Guide
User Guide Access to Internet PC Laptop or desk top HyNet Gateway Interconnect Cable Remote Power Supply NOTICE: Network configuration settings may require the assistance of an Information Technology (IT) administrator. Incorrect settings could interfere with the site’s Local Area Network (LAN) and HyNet™ operation. -
Page 2: Table Of Contents
Using DHCP to Acquire the IP Address via the Gate Operator Controller ........17 13.2.1 Using Network Setup Menu from the Gate Operator Controller (NO DHCP) ......18 Connecting Multiple Gate Operators ..................... 18 Configuring the HyNet Web Interface ....................19 HyNet Gateway Home Page ........................19 © 2016 www.hysecurity.com page i... - Page 3 RESTful Vehicle and Loop Counts ...................... 33 23.4 RESTful Gate Faults ..........................33 23.5 RESTful Gate Control .......................... 34 23.6 RESTful Web Service Callbacks ......................34 23.7 RESTful Clearing Web Service Callbacks .................... 35 SPECIFICATIONS ..............................37 © 2016 www.hysecurity.com page ii...
-
Page 4: Safety Information
ECHNICAL UPPORT For technical support in the U.S., call your installer or authorized distributor. Qualified HySecurity distributors are experienced and trained to assist in resolving any problems. For the name of a qualified distributor near you, contact HySecurity at 800-321-9947. -
Page 5: Hynet Components
Serial, Micro-B USB, internal managed switch configuration. For more information, see HyNet Gateway Managed Switch. Copper, RJ45 data (10/100/1000 Mb) Auto detection. Fiber SFP (100/1000/2500 Mb). For more information, see Steps to Configure HyNet using SFP Port. © 2017 www.hysecurity.com D0737 Rev. B Page 5 of 37... -
Page 6: Hynet Led Status Indicators
HyNet trying to connect to network. steady Hardware fault. flashing Charge is low on coin battery. Replace coin battery. steady or no LED lit HyNet internal managed switch is not functioning. Contact Technical Support. © 2017 www.hysecurity.com D0737 Rev. B Page 6 of 37... -
Page 7: Getting Started
ETTING TARTED HyNet™ provides network connectivity and services to an entry or exit point employing HySecurity automatic gate operators in the following configurations: • Single-gate • Dual-gates (bi-parting single or interlocked gates) • Sally Port (interlocked gates) • Sequenced gates (interlocked gates) The HyNet uses multi-drop RS-485 to communicate with each gate operator at the entry/exit point. -
Page 8: What's In The Box
Interconnect Harnesses, MX3857. Order additional interconnect harnesses if wiring two or more gate operators in series. See Table 2. Table 2: RS-485 Connection Requirements for Multiple Gate Operators # of Installer supplied Gate Operators per 1 HyNet Order Addt’l MX3857 Cables © 2017 www.hysecurity.com D0737 Rev. B Page 8 of 37... -
Page 9: Hynet Mounting Kits For The Gate Operator
/ keypad or with a cable connection to a PC laptop running S.T.A.R.T. 3.01 or higher. If you are unfamiliar with assigning system addresses, review the steps in the HyNet Gateway Quick Start guide shipped in the box. © 2017 www.hysecurity.com D0737 Rev. B Page 9 of 37... -
Page 10: Configure Hynet Gateway
See Configure HyNet Via the Gate Operator Display Option 1: NOTE: Be sure to upload the latest firmware for your gate operator. Ethernet (See HyNet Gateway Quick Start) To obtain S.T.A.R.T. software and operator firmware, visit www.hysecurity.com and register. Option 2: 11.1 C ONFIGURE SING ERIAL ICRO... -
Page 11: Steps To Configure Hynet Using Serial Micro Usb Cable
Admin, User and Installer accounts so each has a unique login and password. PING Command 11.1.3 If you wish to check network connectivity from the HyNet to other devices, the “ping” command can be used as shown in the screen shot. © 2017 www.hysecurity.com D0737 Rev. B Page 11 of 37... -
Page 12: Configure Hynet Using Sfp
• SFP Cable Connection The Small Form-factor Pluggable (SFP) port is a compact, hot-pluggable transceiver. (HySecurity does not supply this transceiver.) Supported fiber channel types include: SX (up to 2.5Gb/s), LX, EX, ZX, EZX, BX, XD, SFSW, CWDM, and DWDM. -
Page 13: Wiring The Hynet To The Controller
RS-485 Installer supplies shielded wiring Shield to Do NOT use +24VDC here. Flying lead connection for +24VDC Option: +12VDC if using SDC Smart DC Controller Connections Smart Touch Controller Connections © 2017 www.hysecurity.com D0737 Rev. B Page 13 of 37... -
Page 14: Interconnect Cable (Installer Supplied Cable)
Belden 9841 or equivalent is recommended. The connector can handle wire gauges from 28 -18 AWG, but HySecurity recommends 4 conductor, 2 pair twisted, shielded, 24 - 20 AWG wiring. The use of either stranded or solid core wire is acceptable. -
Page 15: Creating The Interconnect Cable
For a multiple gate site scenario (gate operators connected in parallel), refer to Connecting Multiple Gate Operators. 4. With SA assigned, press Menu to exit Menu Mode and return to Run Mode. © 2017 www.hysecurity.com D0737 Rev. B Page 15 of 37... -
Page 16: Configure Hynet Via The Gate Operator Display
Press Next or Previous. Press Select. Press Next or Previous. Two left characters blink. Continue pressing Next to view all selections. Blinking characters become static. Advance - press Next Previous - press Previous © 2017 www.hysecurity.com D0737 Rev. B Page 16 of 37... -
Page 17: Using Dhcp To Acquire The Ip Address Via The Gate Operator Controller
NOTE: If the IP ADDRESS does not appear in the System Scroll, then HyNet has failed to acquire the IP Address and network settings from the LAN’s DHCP server. Consult with your IT Administrator or contact HySecurity. 9. When the recorded IP Address is provided to the person (IT Admin) who is finalizing the network set up, the remainder of the HyNet configuration can be accomplished through the HyNet web interface. -
Page 18: Using Network Setup Menu From The Gate Operator Controller (No Dhcp)
Up to four gate operators may be connected in a daisy-chain format. Properly assign the system addresses SA2, SA3, or SA4 to its associated gate operator. NOTE: Multiple gates must be connected in parallel. © 2017 www.hysecurity.com D0737 Rev. B Page 18 of 37... -
Page 19: Configuring The Hynet Web Interface
? delivers online HELP associated with the content of the display • logs out the current user To become familiar with the embedded web pages, click on the menu drop down features and blue navigational buttons: © 2017 www.hysecurity.com D0737 Rev. B Page 19 of 37... -
Page 20: 16.1 Setup Menu
Enter Your License Key - Enter or retrieve your license key. Without a license key you are restricted the top 5 selections under the SETUP tab. To access the extended and enterprise HyNet features, register online for your distributor or installer portal at www.hysecurity.com. © 2017 www.hysecurity.com... -
Page 21: Manage Accounts
6. Enter a password (max 32 alphanumeric characters). 7. When you have modified the appropriate fields, review your entries and click on the Submit button. If entries are acceptable, the USERS configuration page appears. © 2017 www.hysecurity.com D0737 Rev. B Page 21 of 37... -
Page 22: Reset Admin, User & Installer Passwords
CAUTION!: Protect your accounts from internet hacks! HySecurity highly recommends that the customer, upon establishing network connection with HyNet Gateway, immediately change the default passwords on the accounts (Admin, User and Installer and managed switch), so each has a unique login and password. Note that the User and Installer accounts are sample accounts and may be deleted or renamed. -
Page 23: Manual Configuration (No Dhcp Addressing Available)
PERATIONS URVEILLANCE AMERA ETUP Access to the DEFINE OPERATIONS page is limited to Installer and Administrator accounts. HySecurity highly recommends video surveillance of remotely controlled gate operator(s). Through DEFINE OPERATIONS, you can: • Address video surveillance feeds (RTSP and IP camera) •... -
Page 24: Update Software
1. If needed, take these steps to obtain your license key: • Hover over SETUP and click Enter License Key. • Click Retrieve your License Key and register your HyNet through the HySecurity website portal. • Login & click, HyNet License. Follow the online steps. -
Page 25: License Key Accessible Features
Click the drop-down menu. • Click each pertinent box that you wish to receive notifications from. • Click outside the shaded list area to access the Submit button. 4. Click Submit. © 2017 www.hysecurity.com D0737 Rev. B Page 25 of 37... -
Page 26: Configure Smtp And Ntp
3. When pertinent fields are filled, click the Submit button. NOTE: Access online content Help files by clicking “?”in the upper right hand corner of the HyNet display’s web interface. © 2017 www.hysecurity.com D0737 Rev. B Page 26 of 37... -
Page 27: Configure Snmp
Switch Using CLI Switch via Web Interface NOTE: Review What You Need to Begin. Be sure to upload the latest firmware for your gate operator. To obtain S.T.A.R.T. software and operator firmware, visit www.hysecurity.com and register. © 2017 www.hysecurity.com D0737 Rev. B... -
Page 28: Configure The Managed Switch Using Cli
Username: admin Password: CAUTION!: Protect your accounts from internet hacks! HySecurity highly recommends that the customer, upon establishing network connection with HyNet Gateway, immediately change the default passwords on the Admin, User and Installer accounts and HyNet managed switch, so each has a unique login and password. -
Page 29: Determine Switch Ip Address
NOTE: If you do not take the last step to save an IP or DHCP configuration, the configuration settings are lost during the next system reset. If you wish to check network connectivity from the switch to other devices, use the “ping” command. © 2017 www.hysecurity.com D0737 Rev. B Page 29 of 37... -
Page 30: Configure Managed Switch Via Web Interface
To save your changes, take the following steps: 3. In the left column, click ‘Maintenance’ -> ‘Configuration’ -> ‘Save startup-config’ 4. Click ‘Save Configuration’. Otherwise the next reboot will restore the previous configuration: © 2017 www.hysecurity.com D0737 Rev. B Page 30 of 37... -
Page 31: Restful Services
Callbacks. A maximum of 8 callbacks can be configured. Callbacks can also be configured (with a user ID and password) using “Basic” authentication protocol. NOT Supported: “Digest” authentication and SSL callbacks. © 2017 www.hysecurity.com D0737 Rev. B Page 31 of 37... -
Page 32: Restful Status
Request Parameters: None Request Body: None Response Headers: HTTP/1.1 200 OK Response Body: [{"STATE": {"LASTCMD":"Close Complete", "LASTCMDBIN":"4", "GATE":"Normal Stop", "GATEBIN":"4", "BAT":"Battery OK", "BATBIN":"4", "LOOPS": {"ELD":"0","IOLD":"0","OOLD":"0","HLD":"0"}}, "INPUTS": {"AC":"1","OPEN":"0","CLOSE":"0","PARTOPEN":"0", "SENSORS": {"PEO":"0","PEC":"0",”PEB”:”0”,"GEO":"0","GEC":"0","GEB":"1"}}, "FAULTS":"0"}] © 2017 www.hysecurity.com D0737 Rev. B Page 32 of 37... -
Page 33: Restful Vehicle And Loop Counts
/rest/faults/event /rest/faults/alert /rest/faults/fault_error Request Headers: Request Parameters: None Request Body: None Response Headers: HTTP/1.1 200 OK Response Body: [{"NOTICE":"NOTICE - none", "EVENT":"EVENT - none", "ALERT":"ALERT - none", "FAULT/ERROR":"FAULT/ERROR - none"}] © 2017 www.hysecurity.com D0737 Rev. B Page 33 of 37... -
Page 34: Restful Gate Control
Install callback URL (user, write only) NOTE: Callbacks use no SSL or digest auth (basic only) Routes: /rest/callback/faults /rest/callback/faults/notice /rest/callback/faults/event /rest/callback/faults/alert /rest/callback/faults/fault_error /rest/callback/counts /rest/callback/counts/transient /rest/callback/counts/tenant /rest/callback/counts/special /rest/callback/counts/unknown /rest/callback/counts/ELD /rest/callback/counts/IOLD /rest/callback/counts/OOLD /rest/callback/counts/HLD /rest/callback/status /rest/callback/status/state /rest/callback/status/state/lastcmd © 2017 www.hysecurity.com D0737 Rev. B Page 34 of 37... -
Page 35: Restful Clearing Web Service Callbacks
The following web service performs a reset of the callback directory and clears all callbacks that have been installed. Description: Used to reset all callbacks to zero Route: /rest/callback/clear Request Headers: Request Parameters: None Request Body: None Response Headers: HTTP/1.1 200 OK Response Body: [{"RESULT":"Success"}] © 2017 www.hysecurity.com D0737 Rev. B Page 35 of 37... - Page 36 Communicate (verify) IP address to IT Network Admin for proper web interface configuration. 4. Verify gate operator installation per product manual instructions ____________ 5. Take photographs of installation and provide an End User Demo ____________ © 2017 www.hysecurity.com D0737 Rev. B Page 36 of 37...
-
Page 37: Specifications
Additionally, HySecurity Gate, Inc. makes no representations or warranty with respect to this manual. We also reserve the right to make changes in the products described without notice and without any obligation to notify any persons of any such revision or change.