Download Print this page
Cisco Aironet AIR-ANT25-LOC-02 Installation Manual

Cisco Aironet AIR-ANT25-LOC-02 Installation Manual

Directional hyperlocation antenna

Advertisement

Quick Links

I
NSTALLATION
Cisco Aironet Directional Hyperlocation
Antenna (AIR-ANT25-LOC-02=)
Cisco Systems, Inc.
www.cisco.com
D r a f t L a b e l — C i s c o C o n f i d e n t i a l
G
UIDE

Advertisement

loading

Summary of Contents for Cisco Aironet AIR-ANT25-LOC-02

  • Page 1 D r a f t L a b e l — C i s c o C o n f i d e n t i a l NSTALLATION UIDE Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Cisco Systems, Inc. www.cisco.com...
  • Page 2 The antenna radome can be painted using commonly available non-conductive spray paints, such as Krylon or Rust-Oleum. The antenna is designed for use in indoor or outdoor environments. The antenna is designed for use with the Cisco Aironet AP3702E and AP3702P access points along with the Cisco Hyperlocation module (AIR-RM3010L-x-K9=).
  • Page 3: Technical Specifications

    Four coaxial cables with RP-TNC connectors that attach to the AP’s antenna connectors. Although two cables are labeled A and two are labeled B, this has no Note significance to the order in which these cables are attached to the Cisco AP3702E. Length 14.5 in. (36.8 cm) Width 20 in.
  • Page 4 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 1 Antenna Dimensions (in inches) 14.00...
  • Page 5 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) 2.4 GHz WiFi Antenna Radiation Patterns Figure 2 2.4 GHz Radiation Pattern...
  • Page 6 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 3 2.4 GHz Radiation Pattern —...
  • Page 7 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) 5 GHz WiFi Antenna Radiation Patterns...
  • Page 8: What's In The Box

    D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 5 5 GHz Radiation Pattern —...
  • Page 9: Parts Of The Antenna

    Although two cables are labeled A and two are labeled B, this has no significance to the order in which these cables are attached to the Cisco AP3702E. One cable with a rectangular (DART) Arrow denoting the direction for Hyperlocation. This arrow is...
  • Page 10 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 7 Back view of the antenna Holes for attaching the mounting bracket.
  • Page 11 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Mounting Bracket Hardware Kit Figure 8 shows the parts of the antenna bracket kit that is factory-shipped with the antenna.
  • Page 12: Mounting The Antenna

    D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Mounting the Antenna Follow these steps for installing the antenna: ...
  • Page 13 Choosing the Mounting Location and Brackets The antenna is designed for use with the Cisco Aironet AP3702E and AP3702P access points along with the Cisco Hyperlocation module (AIR-RM3010L-x-K9=). The antenna can be mounted only vertically, on a wall, or on a pole. For pole-mounting, the pole should have a minimum diameter of 2 inches and a maximum diameter of 5 inches (50mm - 135mm).
  • Page 14 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Depending on where you are mounting the antenna, there are multiple mounting and bracket assembly options available.
  • Page 15 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 10 Length of Short Link Mount – in inches (and millimeters) 2.612...
  • Page 16 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 11 Assembling the Short Link Mount Mount flange which attaches to the antenna.
  • Page 17 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 12 Length of Fully Assembled Mount Arm-Flanges Bracket – in inches (and millimeters) (176.1)
  • Page 18 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 13 Assembling the Full Mount Arm–Flanges Bracket THIS SIDE MOUNTS TO ANTENNA 4-PLCS.
  • Page 19 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) The following table lists the materials needed for this installation:...
  • Page 20 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 14 Flush-mounting the Antenna on a Wall Holes for mounting the antenna to the wall using Hole in the wall through which the cables are routed.
  • Page 21 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 15 Short-Link Mount Assembly The following table lists the materials needed for this installation:...
  • Page 22 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) • “Length of Short Link Mount – in inches (and millimeters)”...
  • Page 23 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Step 7 Mount the antenna–mount flange assembly on to the flange mount on the pole. For guidance, see the...
  • Page 24 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Materials Needed Factory-Shipped? Slotted screwdriver (Used for tightening the screws on the hose clamps.)
  • Page 25 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Step 9 After you adjust the antenna position, tighten the adjustment screws to 18.7 +/- 5 lb-ft (25.4 Nm).
  • Page 26 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=) Figure 17 Antenna Azimuth Adjustment Figure 18...
  • Page 27: Painting The Antenna

    The RSS feeds are a free service. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
  • Page 28 D r a f t L a b e l — C i s c o C o n f i d e n t i a l Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=)