Ebyte E-840-TTL-4G02 User Manual page 9

Chengdu Ebyte Electronic Technology Co.,Ltd
1. Click the tool "Enter Configuration Status" button and wait for the device parameters to be automatically obtained. After
completion, the following figure is displayed:：
2. Query the signal strength, set the device connection server IP and port number to be: 116.62.42.192, 8124; (Ebyte
test server), and finally click "Save all parameters", and finally as shown below:：
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd
E840-TTL(4G-02)User Manual
8