Advertisement
Quick Links
Advertisement
Related Manuals for KI Uniframe Conver
Summary of Contents for KI Uniframe Conver
- Page 1 Assembly Instructions Uniframe Conver ®...
- Page 3 Uniframe ® Convertible Bench Assembly Instructions ” ratchet wrench, ” & ” sockets, adjustable wrench. Tools Required: 4mm Hex wrench, Top Assembly Label on leg Qty. 1 L=Left- & R=Right-hand Leg Assemblies Support Leg Assembly Right-hand Qty. 1 Bench Assembly Qty.
- Page 4 Uniframe Convertible Bench ® Assembly Instructions Description Label on leg Leg Assemblies item 10 1. Identify right- & left-hand support leg assemblies by labels on upper support 4. Place bench assembly with main tube onto leg saddles. member (Figure 1 & Detail A). ”...
-
Page 5: Item Description
Uniframe Convertible Bench ® Assembly Instructions match labels slotted angle leg upright label “R” apron assembly label “R” top assembly item 3 item 7 item 7* item 8 item 8* Detail C item 1* * Install items 7, 8 & 1 hardware on both legs before installing top assembly leg brace item 4... - Page 6 Uniframe Convertible Bench ® Assembly Instructions locking brace / -16 nut / -16 nut brace bolt brace item 1* item 3 Detail D Figure 3 - Braces to Top at Apron Assembly Top Leg Brace to Apron *Steel spacers allow the fasteners to tighten without restricting movement at pivot points Note: Steel spacers allow the fasteners to tighten without restricting ”...
- Page 7 Uniframe Convertible Bench ® Assembly Instructions Note: If the top surface assembly is not level once the top support brace is attached to the apron bolt, adjustments can be made at both ends of the top surface. The “apron bolt” is secured at the factory into a slotted hole in the “locking pivot angle brace”...
- Page 8 Uniframe Convertible Bench ® Assembly Instructions movement at pivot points.
- Page 9 KI is a registered trademark of Krueger International, Inc. © 2016 Krueger International, Inc. All Rights Reserved Code KI-61586R10/KI/PDF/0616 Part # 13.7709...
Need help?
Do you have a question about the Uniframe Conver and is the answer not in the manual?
Questions and answers