Last-Digit Capture - Datalogic Magellan 9300i Setup Manual
Hide thumbs
Also See for Magellan 9300i:
- Quick reference manual (16 pages) ,
- Product reference manual (520 pages) ,
- Setup manual (14 pages)
Table of Contents
Advertisement
Last-Digit Capture
7
Scan this barcode to enter programming mode. After scan, the green light on the top of the
scanner/scale will flash, indicating the device is in programming mode.
8
Enable/Disable last-digit capture with these barcodes:
To enable scanning of the last digit of UPC-E barcode numbers, scan this barcode and wait for the
double beep to confirm success.
To disable scanning of the last digit of UPC-E barcode numbers, scan this barcode and wait for the
double beep to confirm success.
9
To finalize last-digit capture configuration, scan this barcode. After scan, the device will reboot and
the green lights will stop flashing, indicating the device has exited programming mode.
A Global Payments Company
Magellan 9300i Setup Guide
Page 12
Hide quick links:
Advertisement
Table of Contents
