Advertisement
Quick Links
Repair Kit
Pressure Control
Replacement Kit
- For servicing FinishPro 290 and FinishPro II 295 sprayers -
2600 psi Models: 257528
2800 psi Models: 257529
3000 psi Models: 24U996
Important Safety Instructions
For detailed instructions and warnings,
see sprayer manual.
Pressure Relief Procedure
To reduce the risk of injury from injection, always follow
this procedure when instructed to relieve pressure,
stop spraying, service equipment, or install or clean
spray tip.
1. Set power/function selection switch to OFF and
unplug sprayer.
2. Turn pressure knob to lowest setting.
3. Hold gun to side of grounded metal pail. Trigger the
gun to relieve pressure.
4. Turn prime valve to PRIME.
If you suspect spray tip or hose is completely clogged, or
that pressure has not been fully relieved after following
these steps, VERY SLOWLY loosen tip guard retaining
nut or hose end coupling to relieve pressure gradually,
then loosen completely. Clear tip or hose obstruction.
ti9346a
313899B
EN
Advertisement
Related Manuals for Graco 257528
Summary of Contents for Graco 257528
- Page 1 Repair Kit Pressure Control 313899B Replacement Kit - For servicing FinishPro 290 and FinishPro II 295 sprayers - 2600 psi Models: 257528 2800 psi Models: 257529 3000 psi Models: 24U996 Important Safety Instructions For detailed instructions and warnings, see sprayer manual.
- Page 2 Removal Installation 1. Relieve Pressure (see cover) and unplug power • Read all Installation Notes on back of this page. cord. 1. Screw new pressure control switch (P) into pump 2. Remove pail hook (G) from bottom of front cover (M), and torque to 140-160 in-lb (16-18 N•m).
- Page 3 Rod/Yoke Detail Replacement Kit Pump Replacement ti13842a Pressure Control Switch Replacement Kit 257528 (2600 psi Models) 257529 (2800 psi Models) 24U996 (3000 psi Models) Drive Train Detail Wiring Detail Installation Notes To prevent misalignment, assemble sprayer tipped onto back of enclosure.
- Page 4 For the latest information about Graco products, visit www.graco.com. TO PLACE AN ORDER, contact your Graco distributor or call 1-800-690-2894 to identify the nearest distributor. All written and visual data contained in this document reflects the latest product information available at the time of publication.