Alto-Shaam FryTech Series Installation Operation & Maintenance page 28

C L E A N I N G
OIL FILTRATION INSTRUCTIONS
FILTER CLEANING & MAINTENANCE
NOTE:
Make certain to use hand protection
when working with hot surfaces.
REUSABLE MESH FILTER OPTION:
Clean the reusable mesh filter (FI-27014) by spraying
thoroughly with hot water. dO NOT clean in the
dishwasher. dO NOT use detergents to clean. Detergents
and detergent residues will significantly reduce the life of
oil and shortening products.
C A U T I O N
A WORN FILTER WILL AFFECT
PRODUCT FRYING RESULTS.
Make certain the filter is performing efficiently by
inspecting the filter each time it is cleaned. Examine
for cuts and holes. For the best results, replace the filter
whenever necessary.
C A U T I O N
TO PREVENT FILTER DAMAGE, DO NOT USE SHARP
IMPLEMENTS TO REMOVE SCRAPS FROM THE FILTER.
MN -3 5 75 1 • Ele c tri c Fry er B a ttery Oper ati o n & Ca re Man ual • 26
Make certain the filter is securely fastened to the filter
frame and cartridge before returning the assembly to the
mobile oil drawer.
To discard deteriorated oil/shortening, the drawer can be
pulled from the fryer and can be rolled to a convenient
location for use with a pumping device.
ALWAYS MAKE CERTAIN THE dRAWER IS
PROPERLY POSITIONEd BENEATH THE FRYER
BEFORE OPERATION.
W A R N I N G
TO AVOID PERSONAL INJURY, USE
CAUTION WHEN SURFACES BECOME
SLIPPERY DUE TO SPILLED OR
DRIPPING OIL.
C A U T I O N
METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN
IN OPERATION. TO AVOID BURNS,
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.