Table of Contents
Advertisement
Installation Instructions - Dual Integrated Installation
STEP 7 INSERTING/SECURING INTO CABINET SURROUND
Plug both units into the outlet in the wall.
WARNING
Electrical Shock Hazard.
To reduce the risk of electrical shock, be careful
during the remaining installation steps not to
touch wiring or electrical components inside the
compressor compartment while the appliance is
plugged in and the front access cover is not in
place.
Loosen the strap by removing a Phillips head screw
from the top strap bar and the large tensioner 1/4"
allen screw to allow the strap to move freely during
installation. Retain screws for later installation in this
step. Repeat process for both units.
Find the installation string that is attached to the door
of the unit; this is to be used as you are pushing the
unit back into the opening. The string is attached to the
power cord; as you walk the unit back into the opening
you should pull the string tight to make sure the power
cord is routed underneath the unit.
Installation
String
Slowly walk both units into opening making sure not
to touch the cabinetry on the sides and top to prevent
damage. Both door faces should be 7/8" behind the
front face of surrounding cabinets on either a stainless
or custom panel installation.
WARNING
These appliances are top heavy, especially with
any doors open, and must be secured to prevent
tipping forward which could result in death or
serious injury.
Tip Over Hazard.
As you walk the unit back, pull the anti-tip strap tight.
Secure the strap in the front of the unit. This process
should be completed for each unit.
Secure the strap in the front of the unit by replacing the
screw in the top strap bar (do not overtighten) and the
large tensioner screw to prevent the strap from moving.
This process must be completed for both units.
Replace the waterline strain relief screw.
Strain Relief
Screw
WARNING
Replace waterline strain relief in front rail location as
shown.
Store the excess strapping, string, and water tubing
under the unit.
14
Anti-tip Strap
Electrical Shock Hazard.
31-49133-1
Advertisement
Table of Contents
