Measuring Capacitance - Parkside PZM 2 A1 Operation And Safety Notes

Turn the rotary knob 3 to
Press SELECT 4 repeatedly until
shown in the display 6 .
Connect
–the red test probe 9 to the anode of the
diode to be tested and
–the black test probe 9 to the cathode of the
diode .
The approximate forward voltage drop of the
diode is shown in the display 6 .
NOTE: If the connections are reversed: OL is
shown in the display 6 .
˜ Measuring capacitance
Connect
–the black test probe 9 to COM 8 and
–the red test probe 9 to
Turn the rotary knob 3 to
If the display 6 shows a reading other than 0:
–Press REL 11 to set the value to 0 .
–REL 16 is shown in the display .
Discharge the capacitor to be tested .
Connect the test probes 9 to the 2 leads of
the capacitor .
The reading is shown in the display 6 .
54 GB/IE
/ .
18 is
7 .
.