Press any button to wake up the product from
sleep mode .
Disabling automatic power off:
–Turn the rotary knob 3 from OFF to any
other position .
–Simultaneously, press and hold SELECT 4 .
–
14 goes off in the display 6 .
NOTE: The next time the product is switched
on again, automatic power off is enabled
again .
Use
Data hold
Enter data hold mode:
–Press HOLD 5 .
–The present reading is frozen .
–
21 is shown in the display 6 .
Exit data hold mode:
–Press HOLD 5 again .
–
21 goes off in the display 6 .
Relative mode
Selecting the relative mode causes the product
to store the present reading as a reference for
subsequent measurements .
Set the product to the desired measurement
mode .
Connect the product to a desired circuit (or
object) to obtain a reading . This reading will
then be used as a reference for subsequent
measurements .
GB/IE
49