Aditional Wireless Settings - TP-Link TL-WR820N User Manual

Chapter 4
Method TWO: Push the WPS Button
Click Start on the screen. Within two minutes, press the WPS button on your device.
A Device-(XX-XX-XX-XX-XX-XX) Connected
and the LED should change from blinking to solid on, indicating successful WPS
connection.
Note:
XX-XX-XX-XX-XX-XX is the MAC address of your device.
4 3 5

Aditional Wireless Settings

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
• Enable WMM - WMM function can guarantee the packets with high-priority messages
being transmitted preferentially. It is strongly recommended to enable this function.
• Enable Short GI - It is recommended to enable this function, for it will increase the
data capacity by reducing the guard interval time.
Wireless > Additional
Configure the Router in Wireless Router Mode
message should appear on the screen
Settings.
37